It requires no power supply, simple installation with double-sided tape, battery included, works with the vibrations of the motor, automatically turning on, two hour counter functions: 1 total + 1 partially resettable. Lock function to prevent it from being activated during transport, IP68 waterproof, possibility of increasing or decreasing sensitivity, resolution 0.1 hours, wireless operation.22,46 € 29,95 € VAT included
The engine counter Get Athena C1 model is the only one able to operate without any connection to the bike. In fact, using the special tape supplied, applies in seconds in the preferred position. Interpreting and distinguishing the vibrations of the frame on which it is applied, Get The counter C1 detects engine operation distinguishing random vibrations from the characteristics of the engine started. The engine counter Get Athena C1 is fully waterproof (IP68) and designed to operate even in the most extreme applications such as off road. C1E with two counter and records the total operating hours (not reset), but thanks to the button located on the front, used to reset the running count. The integrated battery guarantees operation for three years.15,01 € VAT included
Thanks to the internal accelerometer the NRTeam hour meter is able to operate without connection to the bike. Using the 3M adhesive supplied, the hour counter is applied in a few seconds, saving the installer a lot of time. Reading the vibrations of the frame on which it is applied, the hour meter detects the operation of the engine distinguishing the random vibrations from those characteristics of the engine started. A convenient setting function allows you to decide the sensitivity of the vibrations detected. The hour meter has two timers: total non-resettable and partial resettable. The integrated lithium battery guarantees operation for three years without any maintenance.21,76 € 26,54 € VAT included
The range of wire-breaker hour-meters is composed of an economic hour-meter that simply measures the hours of use and of a more complete instrumentation that allows the motor rotation speed to be read and is therefore a useful support during maintenance and / or commissioning to point.12,51 € 15,25 € VAT included
The hour meter and wire counter are the most complete instrument in the range of meters. Reading the current from the spark plug cable, the hour meter detects the operation of the engine and only counts the engine operating hours. The passage of current is read by induction and therefore it is not necessary to strip or disconnect any cable. It is sufficient to wrap the supplied cable for 4 or 5 turns around the spark plug cable to make the hour meter work. The device is completely waterproof (IP68) and is designed to work even in the most extreme applications such as off-road applications. Features: - Backlit screen - Total hour counter up to 999.9 hours (non-resettable) and partial hour counter (resettable). - Programmable maintenance interval alert. - Reading of laps in real time with the maximum number of laps reached and the maximum number of laps exceeded (programmable at will). - IP68 plastic structure (waterproof) with 65x35 mm dimensions - Interchangeable stack supplied in the package and 3M adhesive with velcro supplied. PRODUCT DESCRIPTION: The NRTeam hour meters are produced and tested to meet the most extreme needs. The range consists of a wire-based hour meter that ensures greater reliability in the face of greater assembly complexity and a wireless hour meter that allows assembly in 5 seconds without the need for any tools. The range of wire-breaker hour-meters is composed of an economic hour-meter that simply measures the hours of use and of a more complete instrumentation that allows the motor rotation speed to be read and is therefore a useful support during maintenance and / or commissioning to point. The complete offer allows you to meet the needs of every driver, from the hobbyist to the professional!28,08 € 29,56 € VAT included
Smart SOS is the new GET device that acts both as a programmable alarm and as a wireless hour counter. The device is equipped with an internal sensor that perceives falls and, through a free app available for iOS and Android, sends an SOS notification to the chosen contacts. Through Smart SOS it is also possible to set up personalized maintenance intervals, in order to keep the bike always efficient and at maximum performance, as well as to view the total and partial hours (up to 1000 hours). Equipped with replaceable CR2032 battery, Smart SOS is applied directly to the frame, without the need to connect cables or sensors and is resistant to water, mud and dirt.
1: SOS FUNCTION: Using the app it is possible to activate the SOS function, which will send a distress request to the registered contacts. It is also possible to adjust the activation times before sending the notification.
2: SERVICE FUNCTION: It will be possible to insert customized maintenance intervals, in order to have the bike always at a point.
3: HOUR METER FUNCTION: The app allows you to view the partial intervals and total hours of use, as well as adjust the sensitivity of the device.
The wire counters range consists of an economic hour meter that simply measures hours of use and a more complete instrumentation that also allows you to read the engine rotation regime and is therefore a useful support during maintenance and / or putting to point.13,05 € 14,03 € VAT included
Thanks to the accelerometer inside the counter NRTeam is able to function without being connected to the bike. Using the 3M adhesive supplied hour meter is applied in seconds, saving much time installer. Reading the frame vibration on which it is applied, the counter detects the engine operation distinguishing the random vibrations from those characteristics of the engine is started. A comfortable setup function allows you to decide the sensitivity of the detected vibrations. The hour meter has two timers: Total non-resettable and resettable. The built-in lithium battery guarantees operation for three years without any maintenance.23,18 € 24,40 € VAT included
counter practical to properly manage the planned maintenance. Easy to install, and their compact size to be positioned with no space anywhere on the bike. It lets you keep an eye on the hours spent with the engine access so that you can plan routine maintenance not by empirical parameters, but with the precision of working hours spent.38,54 € 46,99 € VAT included
Wireless !!! It is activated with the vibration. No more wires or connection problems. Two different sensitivity levels to suit every need. Ability to notice of planned every 5, 10, 20 hours (control / oil change, control valves, etc..). Partial operating time reset. Total running time is NOT reset. Completely waterproof. Suitable for 2 and 4 stroke engines with one, two or four cylinders. It is fixed by means of adhesive backing supplied. Size 68x33 mm23,18 € VAT included